Description
This RipLock 600 canopy is twice as thick as the RipLock 350. RipLock 600 is our top of the line performance canopy, ideal for windy and extreme weather conditions.
Garden Winds Product Advice: This is a universal gazebo canopy. This canopy has been designed to provide a general fit, not a custom fit, for most first generation square 10' x 10' gazebos. It is possible that this canopy may not fit your gazebo properly. Garden Winds encourages you to first try to identify and purchase one of the custom fit canopies on our website for your gazebo. If a custom canopy is not available, then you should consider a universal canopy for your gazebo. This canopy will not fit gazebos with a corner pocket canopy design.
- Industry exclusive 600-Denier fabric with RipLock Technology.
- The outer perimeter of the main canopy is 120" x 120".
- Pitch measurement from corner to center top point of canopy is 87" (enlarge picture for details).
- Polymer coating for protection against UV rays from sun and increased durability.
- Ventilated top allows for wind gusts.
- This product is water resistant, not water proof.
- Velcro straps allow easy installation and attachment to gazebo.
- Anti-rust brass grommet rings to ensure proper water drainage.
- Designed for a square gazebo, not a hexagon gazebo.
Installation
Replacement Canopy Installation Instructions
Safety First: WARNING!!! This process requires a person to use a ladder to reach the top of the gazebo. It is important that the ladder that you use be stable and safe. It is important that a second person be present in the event you need help. Safety should be your number one priority to prevent falling during installation. If you do not feel comfortable removing or installing the canopy, please seek a professional for help.
Remove Your Old Canopy First
1. Ladder - You will need a stable ladder that will allow you to safely reach the top of the gazebo.
2. Loosen the Canopy – Unfasten all Velcro straps. Velcro straps are usually located on the seams of the canopy. Next, begin removing the canopy. Start with any corner. Pull the canopy fabric away from the corner, and then towards the center of the gazebo roof. Repeat this for all four corners of the canopy. You are now ready to completely remove the canopy from the gazebo roof frame.
Installing New Canopy
1. Ladder - You will need a stable ladder that will allow you to safely reach the top of the gazebo.
2. Install the Canopy – Loosely and evenly drape the canopy over the top of the gazebo roof. Begin pulling the corners of the canopy towards the corners of the gazebo frame. Fasten the bottom tier tightly to the canopy by placing the corners of the canopy over the corners of the gazebo frame. Do this for all four corners. You will need to pull harder on the last corner, as there is less slack available. Then fasten all Velcro straps to the corresponding roof bars.
3. You’re finished! Enjoy your new canopy!!!
Copyrighted – Garden Winds
