Description
IN STOCK! SHIPS TODAY! (If Ordered Before 2pm Pacific Time Monday-Friday.) $8.95 SHIPPING! (Please read Return Policy.)
Provide new support for your swing cushions with our universal replacement swing backing!
Garden Winds Product Advice:
PLEASE NOTE: THIS UNIVERSAL SWING SLING BACKING ARE USED TO SUPPORT THE CUSHION SEATS. IT IS NOT A SEAT ITSELF.
- This is an after-market universal replacement swing cushion backing (also know as a swing sling). This is the essential piece in many patio swing models that support the cushion seats.
- Made of durable 320g/sqm nylon fabric.
- Adjustable straps for added support, easy installation and a universal fit.
- Fits patio swings up to 65 inches long.
- Made from a BEIGE colored nylon fabric. The color and fabric type will not be the same as your original swing.
- NOTE - TYPICALLY, YOU WILL NEED TWO SLINGS, ONE FOR EACH SIDE. SLING SWING BACKING GOES OVER THE SEATING AROUND THE BACKSIDE AND RE-ATTACHES TO ITSELF.
You will receive only the replacement swing backing (i.e., fabric support piece that holds up the seat cushions) with this order, metal swing structure and seat cushions are not included. Seat cushions not included. For questions, please call us toll free at 877 479-4637 and ask to speak with an associate.
|
UNIVERSAL SWING BACKING INSTALL
SEE PHOTO GALLERY TAB ABOVE FOR PICTURES
|
1) Any existing seat and back webbing will have to be removed to attach the Sling Swing.
2) Start by facing the front of the swing, hold the Swing Sling Vertically with the sewn portion of the straps facing the swing, and the smooth fabric portion facing toward you. Position the male portion of the buckles facing upward.
3) Begin weaving the straps with the male portion of the buckles over Bar A. Bar A is the bar that forms the front of the seat that would rest under your knees if you were sitting on the swing.
4) Continue to weave the straps with the male portion of the buckles under Bar B. Bar B is the bar that forms the corner of the L made by the swing seat and the swing back.
5) Then drape the straps with the male portion of the buckles over Bar C. Bar C is the bar that forms the top of the seat back frame.
6) Continue to pull the straps down the back of the swing, under Bar B and attach the male portion of the buckles to the female portion under Bar B and tighten the straps.
7) Some swings have cross bars (Bars D and E). The Swing Sling width of 28.5 inches will accommodate this design in most cases. Most swings will require two Sling Swings to provide a complete base and backing for the swing. A single Sling Swing can be used in most instances to repair the damage to half of a swing seat or back.
8) The maximum swing width that can be covered with two Sling Swings is 65 inches. This will result in small gaps between the edge of the swing seat and back frame as well as between each sling. If you swing is wider that 65 inches, you may want consider the purchase of three Sling Swings. |
